Direction Of Pedal Assistant Sensor Setting; Sensitivity Of Pas Setting - TBA KM5S-LCD User Manual

Direction of pedal assistant sensor setting

PAS means Pedal Assistant System, "run-F" means
forward direction, "run-b" means backward direction.
Press UP/DOWN to select F or b (The default direction is
forward) and short press MODE to confirm and proceed
to PAS sensitivity setting.

Sensitivity of PAS setting

SCN means the sensitivity of PAS. It ranges from 2 to
9 where 2 is strongest & 9 is the weakest (SCN default
value is 2). UP/DOWN is used to select the sensitivity
value and short press MODE to save & proceed to
magnet disk setting.
Direction of PAS sensor setting
31