Display interface
After starting up the display, the default display is
running speed. Short press MODE to change the
indicated information in sequence as follows: Running
speed (Km/h) → Average speed (Km/h) → Max speed
(Km/h) → Trip distance (km) → Total distance (km) →
Travel time → Running speed (Km/h).
Running speed
Trip time
Push cruise control
Hold DOWN for 2 seconds to start power assistant
walk. The e-bike will move at a uniform speed of 6 Km/h.
PUS shows on the screen.
Average speed
Trip distance
15
Max speed
Total distance