3onedata RACK2100 Series Quick Installation Manual

RACK2100 Series
Industrial Multi-service Rack
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【Package Checklist】
Please check the integrity of package and accessories while
first using the product.
1 Industrial multi-service rack 2 Quick installation guide
3 Certification 4 Warranty card
5 Power line x 2 6 CD (only for management
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it asap.
【Product Overview】
This series products are 2U industrial multi-service racks,
which can be used with management card and daughter card.
The models are as follows:
Model I RACK2100-F-2AC (chassis with front power
supply)
Model II
Model III
Model IV
Model V
Model VI
Model VII ECU100M-1GT2GS (1 Gigabit copper port + 2
Model VIII ECU100M-2GT1GF (2 Gigabit copper ports + 1
Model IX
Model X
Model XI
Model XII ECU100-1GT2GS (1 Gigabit copper port + 2
Model XIII ECU100-2GT1GF (2 Gigabit copper ports + 1
【Rack Panel Design】

Rack
Front power supply scheme: front panel and rear panel

card)
Rear power supply scheme: front panel and rear panel

(Default)
RACK2100-R-2AC (chassis with rear power
supply)
NMU (Management card)
ECU100M-1T1F (1 100M copper port + 1 100M
fiber port, managed daughter card)
ECU100M-2T1F (2 100M copper ports + 1 100M
fiber port, managed daughter card)
ECU100M-1GT1GF (1 Gigabit copper port + 1
Gigabit fiber port, managed daughter card)
Gigabit SFP slots, managed daughter card)
Gigabit fiber port, managed daughter card)
ECU100-1T1F (1 100M copper port + 1 100M fiber
port, unmanaged daughter card)
ECU100-2T1F (2 100M copper ports + 1 100M
fiber port, unmanaged daughter card)
ECU100-1GT1GF (1 Gigabit copper port + 1
Gigabit fiber port, unmanaged daughter card)
Gigabit SFP slots, unmanaged daughter card)
Gigabit fiber port, unmanaged daughter card)
Top Panel

1. Rack mounting location hole
2. Handle (removable)
3. Power indicator (P1/P2)
4. Shell grounding screw
5. Panel catch (used when the cards are not plugged
in)
6. Input outlet of redundant AC power (P1/P2)
7. Heat dissipation hole
8. Management card identity (M)
9. Daughter card identity (1-18)
【Panel Design of Management Card】
Management card (for managed type)
