Trinity Highway REACT 350 II Product Description Assembly Manual page 30

Attach Nose Cover
1.
Ensure appropriate Nose Cover is attached (Figure 24). The Nose Cover Selection below
will assist in your selection and you should refer to local standards and MUTCD for nose.
Barrier
Traffic on Right
Side of System
2.
Align 1" diameter hole in Nose Cover with 1" diameter hole in Cylinder (Figure 25).
3.
Screw 1/4" self-drilling screw into Cylinder to punch through reflective tape and into the
existing holes in Nose Cover until head of fastener is flush (10 places) (Detail B).
Page 36
Align 1" Hole
(For Assembly of
System Pullout Device)
Figure 25 - Nose Cover Attachment
TrinityHighway.com
Traffic Traffic
Traffic on Both Sides
Figure 24 - Nose Cover Selection
Detail B
Barrier
Traffic
of System
Detail B
29
Barrier
Traffic
Traffic on Left
Side of System
Nose Cover
PN 617966 - R & L
PN 617965 - Gore
1/4" Self-Drilling
PN 116888
Revision E November 2020