Film Composition - SBS FAST SKIN Operation Manual

Fast Skin
1 Protection layer:
during installation. Optional, used for transparent film
only.
2 Film layer: this is the part that remains on the device
after the installation.
Installation layer:
3
site and holds the film in place during the application.
This layer has a cut in the middle that is used to first
install one half of the film and than the other.
4
Bottom layer:
cutting it in the machine. It should remain mostly intact
during cutting.
8

film composition

this layer protects the film layer
this layer adhers to the installation
this layer holds the film together while
1
2
3
4
FAST SKIN - OPERATION MANUAL