TaoTronics TT-BA08 - Wireless 2-in-1 Adapter Manual

TaoTronics TT-BA08 - Wireless 2-in-1 Adapter Manual

Also See for TT-BA08:

Advertisement

TaoTronics TT-BA08 - Wireless 2-in-1 Adapter Manual

Package Contents

Package Contents Step 1

  1. TaoTronics Wireless2-in-1 Adapter (Model: TT-BA08)
  2. 3.5mm Audio Cable
  3. 3.5mm Female to 2 RCA Male Cable
  4. USB Charging Cable
  5. User Guide

Package Contents Step 2 Package Contents Step 3

  1. Volume - / Previous Track
  2. Volume + / Next Track
  3. Transmitter (TX) / Receiver (RX) Mode Switch
  4. LED Indicator
  5. Power Button
  6. Charging Port
  7. 3.5mm Audio Port

Thank you for choosing the TaoTronics TT-BA08 Wireless 2-in-1 Adapter. Please read this guide carefully and keep it in a safe place for future reference. If you need any further assistance, please contact our customer support team at support@taotronics.com.

Control Functions

Function Operation
Power On / Off Press and hold the Power Button for 3 seconds
Pairing When powered on, press the Power Button twice to start pairing
Mode Switch Slide the Mode Switch to and from TX and RX
Play / Pause In RX mode, press the Power Button once to play / pause music
Volume + / - In RX mode, press and hold the Volume + / - Button
Next / Previous Track In RX mode, press the Volume + / - Button once

NOTE:
The mode can only be successfully switched after the adapter is turned off for 5 seconds. After the switch, the pairing history of the devices will be cleared.

If the TT-BA08 cannot pair with your Bluetooth device, please turn the device off for 5 seconds and then switch it from RX mode to TX mode. Turn the device off again and then after 5 seconds, switch it back to RX mode.

LED Indicators

LED Indicator Status
Solid Red LED Charging
LED Off Fully charged
Flashing Red and Blue Pairing in TX / RX mode
Flashing Red Low battery
Solid Blue LED Successfully paired
Flashing Blue Powered on but not paired with Bluetooth® devices

How to Use

Charging

  1. Use a micro USB cable and connect the adapter to any active USB port.
  2. The LED indicator will turn red when charging. It will automatically turn off when the device is fully charged.

NOTE:

  • We recommend charging the unit for at least 2 hours before using it for the first time.

Pairing

Pair in TX mode:

  1. Set the TT-BA08 to TX mode and connect it to your Non- Bluetooth® audio transmitting device.
  2. Place your Bluetooth® audio receiving device, like earphones / speakers, within a 3 feet / 1 meter range and set it to pairing mode.
  3. Turn on the TT-BA08 and tap the power button twice to enter pairing mode. After approximately 10 seconds, pairing will complete.

Pair in RX mode:

  1. Set the TT-BA08 to RX mode and connect it to your non-Bluetooth® audio receiving device.
  2. Turn on the TT-BA08 and tap the power button twice to enter pairing mode.
  3. Activate the Bluetooth® function on your transmitting device – phone / tablet, and search for the nearby Bluetooth® devices.
  4. Find "TaoTronics TT-BA08" in the search results and tap on it to connect. Once connected, the LED indicator will turn solid blue.
NOTE:
  • The adapter will enter pairing mode automatically when powered on for the first time.
  • The original pairing memory will be cleared after a mode switch. It will automatically start pairing each time it's powered on.
  • The adapter can remember previously paired devices and will attempt to pair with devices automatically, without going into pairing mode.

Pair with two devices at the same time

In TX mode:

In TX mode, the adapter is able to pair with two Bluetooth® stereo earphones/speakers at the same time.

  1. Follow the previous instructions in the "Pairing" section to pair the TT-BA08 with your first device.
  2. Turn off the Bluetooth® function on your first device, tap the Power Button twice to pair and connect to your second device.
  3. Turn on the Bluetooth® function on your first device. In approximately 10 seconds, the first device will automatically connect in.

NOTE:

  • When you pair with two devices, both can play music at the same time.
  • The adapter will automatically re-pair when powered on.

In RX mode:

In RX mode, the adapter is able to pair with two Bluetooth® devices at the same time.

  1. Follow previous instructions in the "Pairing" section to pair the TT-BA08 with your first device. Disable the Bluetooth® function on your first device. Tap the Power Button twice to pair with the second device.
  2. Turn on the Bluetooth® of the first device, now TT-BA08 adapter is successfully paired with both devices.

NOTE:

  • Only one device can play music at any time. You have to stop the music on one device to play on the other.
  • The adapter will automatically re-pair when powered on.

www.taotronics.com

EUROPE
E-mail:
support.uk@taotronics.com(UK)
support.de@taotronics.com(DE)
support.fr@taotronics.com(FR)
support.es@taotronics.com(ES)
support.it@taotronics.com(IT)

NORTH AMERICA
E-mail:
support@taotronics.com(US)
support.ca@taotronics.com(CA)
Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)

Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China

Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-manual

Videos

TaoTronics TT-BA08 - Review Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download TaoTronics TT-BA08 - Wireless 2-in-1 Adapter Manual

Advertisement

Need help?

Need help?

Do you have a question about the TT-BA08 and is the answer not in the manual?

Questions and answers

Table of Contents