Up to 33 feet (10 meter) range Up to 10 hours working time on a full charge Easy to pair, no software installation required Key Functions Thank you for choosing the TaoTronics TT-BA07 US UK CA Wireless 2-in-1 Adapter. Please read this guide Bluetooth Receiver Mode carefully and keep it in a safe place for future Connect the 3.5mm audio jack to a wired speaker, stereo, or...
5V DC Battery Capacity 160 mA TaoTronics Wireless 3.5mm Audio Cable 2-in-1 Adapter Working Hours Approx. 10 hours (Model: TT-BA07) (Receiver Mode) Working Hours Approx. 10 hours (Transmitter Mode) Charging Time 2 hours 1.79 x 1.28 x 0.37 in / Dimension (L x W x H) 4.55 x 3.25 x 0.95 cm...
Control Functions Product Diagram Function Operation When off, press and hold the Power Power On Button for 5 seconds When on, press and hold the Power Power Off Button for 5 seconds When powered on, press the Power Pairing Button twice to start pairing. Slide the Mode Switch to and from Mode Switch TX and RX...
LED Indicators How to Use Charging LED Indicator Status 1. Connect the micro-USB end of the charging cable to the Charging Solid Red LED charging port of the Bluetooth adapter. 2. Plug the USB end of the charging cable to a USB charging LED Off Fully charged port or any active USB port.
Page 6
TT-BA07 with your first device. 2. Turn off the Bluetooth function on your first device, tap the 2. Find “TaoTronics TT-BA07” in the search results and tap on it to Power Button twice to pair and connect to your second connect.
Please recharge it and make sure the adapter has enough 2. Turn on the Bluetooth of the first device, now TT-BA07 adapter battery power. Plug the unit to a charger and see if the LED is successfully paired with both devices.
No return will be accepted without seller authorization. Can I use the TT-BA07 adapter while it is charging? Statement internal circuit is protected from over-charging. We can only provide after sale services for products that are...
Page 9
FCC Compliance NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the TT-BA07 and is the answer not in the manual?
Questions and answers