Table of Contents
Advertisement
Requirement
76
Example: HSK clamping sets from Berg
New or manufacturer-reconditioned clamping sets must not be
relubricated. Improper lubrication of the clamping sets may cause
damage to the clamping set or failure of the entire clamping system.
A measuring device required to measure the clamping force can be sourced through
INDEX -Werke, a representative or the tool manufacturer.
Example: Clamping force measuring system from Berg
Maintenance Summary - 4.000 Operating hours
Maintenance Instructions
G200.2
DIE078EN - 05.06.2019
Advertisement
Table of Contents
