Varying Settings Over A Series Of Photographs (Bracketing) - OM SYSTEM OM-5 Instruction Manual

Varying settings over a series of photographs
(Bracketing)
Bracketing is used to vary shooting settings such as exposure and white balance over a series of shots.
Depending on the setting, you may be able to combine several different forms of bracketing. Use
bracketing if you are unsure what settings to use or lack the time needed to change settings during
shooting. You can also store bracketing settings and later recall them simply by turning bracketing on.
AE BKT (AE bracketing)
The camera varies the exposure of each shot. You can select the
bracketing increment from 0.3 EV, 0.7 EV, and 1.0 EV. In single-
frame shooting mode, one photograph is taken each time the
shutter button is pressed all the way down, while in sequential
shooting mode the camera continues to take shots in the following
order while the shutter button is pressed all the way down: no
modification, negative, positive.
Number of shots: Choose from 2, 3, 5, or 7.
A icon is displayed in green until all the shots in the bracketing sequence have been taken.
t
The camera modifies exposure by varying aperture and shutter speed (mode
A
(mode ), aperture (mode
If an option other than [AUTO] is selected for [ISO]
instead modify exposure by varying shutter speed.
The camera brackets the value currently selected for exposure compensation.
The size of the bracketing increment changes with the value selected for
Menu (P. 284).
m
Exposure bracketing cannot be combined with FL or focus bracketing.
C
S
), or ISO sensitivity (mode
216
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
Focus BKT
Back
M
).
(P. 98, P. 117) in mode
[EV Step] in
Varying settings over a series of photographs
Bracketing
Off 3f 1.0EV
2f 0.3EV A-- G--
2f 0.7EV --
2f 1.0EV
--
3f 0.3EV --
3f 0.7EV
--
3f 1.0EV
Set
P
), shutter speed
M
, the camera will
Custom
C
(Bracketing)