Table of Contents
Advertisement
Performing the sequential/self-timer shooting
Adjust settings for burst or self-timer photography. Choose an option according to your subject.
Fix the camera securely on a tripod for self-timer shooting.
C
1.
Press the
gY
2.
Rotate the front or rear dial to select a value.
Custom self-timer options can be viewed by pressing the INFO button.
F
i
h
j
k
button.
Single
Sequential High
Sequential Low
12sec
Y
2sec
Y
Single-frame advance. The camera takes one photo
each time the shutter button is pressed all the way
down.
The camera takes photos at up to about 10 fps while
the shutter button is held all the way down. Focus,
exposure, and white balance are locked at the values
for the first shot in each series.
The camera takes photos at up to about 6 fps while
the shutter button is held all the way down. You can
choose the frame advance rate and the maximum
number of shots in each series
exposure conform to the options selected for
Mode] (P. 118)
and
[
K
or [C-AF+TR] is selected for [
camera will focus before each shot.
The shutter is released 12 s after the shutter button
is pressed all the way down. The self-timer lamp will
light for about 10 s and then start to flash about
2 s before the shutter is released. The camera focuses
when the shutter button is pressed halfway.
When the shutter button is pressed all the way down,
the self-timer lamp will start to flash and a photo will
be taken after about 2 seconds. The camera focuses
when the shutter button is pressed halfway.
101
Performing the sequential/self-timer shooting
(P.
322). Focus and
AEL/AFL] (P.
299). If [C‑AF]
AF Mode], the
K
[
AF
K
Advertisement
Table of Contents
