Control Panel; Switch Off The Device - DCG CLIMA VERI25 Manual

Instruction manual VERI25 AIR COOLER

CONTROL PANEL

TURN ON THE POWER & SET SPEED
Use the following buttons on the control panel to switch on the device while
adjusting the speed of the fan:
• ➃ LOW ➜ Set the lowest blower level
• ➄ MID ➜ Set the middle blower level
• ➅ HIGH➜ Set the highest blower level

SWITCH OFF THE DEVICE

• To switch off the appliance, please use the ➂ OFF button.
SWING
• To set the SWING function, please use the ➀ SWING button.
• Press the ➀ SWING button again to deactivate the function.
NOTE
With this function, the blown air is distributed to the left and right. This allows
you to achieve a horizontal air distribution in the room.
COOL
• To switch on the COOLING function, press the button ➁ COOL.
• As soon as you press this button, the unit starts to pump water to create a
cold and humid air, which is then blown out of the unit.
• Durch pressing the ➁ COOL - button to disable the function.
NOTE
Always make sure there is water in the water tank before starting the cooling
function otherwise the pump will not work and damage the unit.
19
dcg16.it