General Settings; Power Save Mode; Factory Set; Clock Set - LG RC897T Owner's Manual

4.
Use v / V to select an option then press ENTER ( ).
[Add] Adds a unmemorized channel manually.
[Delete] Deletes a memorized channel from
channel list. A digital channel has multiple
channels, so if you delete the digital channel, all
multiple channels will be deleted.
[Skip On/Off] (for memorized digital channel only)
Set the channel to the skipped channel.
The skipped channel number will dim.
The channel cannot be selected using the CH
(+/-) button during normal TV viewing.
[Favorite On/Off] Set the memorized channel to
favorite channel. (favorite channel shows
icon.)
[MFT Adjust] (for memorized analog channel only)
To obtain a clearer picture, tune the MFT option.
5.
Press RETURN (O O ) repeatedly to exit Channel
List menu.

Clock Set

You can set the clock.
1.
Select the [Clock Set] option then B.
2.
Enter the necessary information for year, date and
time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the cur-
rent cursor position.
3.
Press ENTER ( ) to confirm your setting.
TV Aspect
[4:3 Letter Box]: Select when a standard 4:3 TV
is connected. Displays theatrical images with
masking bars above and below the picture.
[4:3 Pan Scan]: Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your
TV screen. Both sides of the picture are cut off.
[16:9 Wide]: Select when a 16:9 wide TV is
connected.

Power Save Mode

Selects whether this unit is in power save mode when
the power is turned off. This option is not available
when a timer recording is set.
[ON]: The front panel display is turned off and
only signals arriving at the antenna input are
passed through when the unit is turned off.
[OFF]: Turns off the [Power Save Mode].

Factory Set

You can reset the Recorder to its original factory
settings.
FAV
1.
Select the [Factory Set] option.
2.
Press B to select [SET] then press ENTER ( ).
3.
Select [OK] and press ENTER ( ).
4.
Follow the Initial Setup Wizard on page 17.
51