Initial Setup Wizard - LG RC897T Owner's Manual

Initial Setup W izard
Initial Setup W izard
After the POWER (1 1 ) is pressed for the first time to
turn on the unit, the Initial Setup Wizard function sets
the Language, Channels and Clock step-by-step until
the setup is complete.
POWER 1
b / B / v / V,
ENTER
*
1.
Use v / V to select a language for the Setup menu
and information display then press ENTER ( ).
Press RETURN ( O )to skip the Initial Setup.
2.
Check your antenna connections.
Press B to move next step.
Press b to go back to the previous level.
3.
Select the [Tuning Band] option then press B .
TV is for over-the-air antenna reception.
CATV is for cable subscribers.
Press b to go back to the previous level.
4.
5.
O RETURN
6.
Note
Note
You can reset the Initial Setup Wizard from the [Factory
Set] in the setup menu. (see page 51).
Press ENTER ( ) to begin the channel search.
You can skip the analog channel scanning by
pressing B.
Press b to go back to the previous level.
Enter the necessary information for year, date and
time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the cur-
rent cursor position.
You can use numbered buttons to change the
setting
Press ENTER ( ) to confirm your setting.
Press RETURN ( O ) to go back to the previous
level.
Press ENTER ( ) to exit the menu.
Press b to go back to the previous level.
17