Playing While You Are Recording; Recording From External Components - LG RC897T Owner's Manual

Playing while you are
Playing while you are
recording
recording
RAM
You can start play from the beginning of the title while
continuing to record it.
While recording (in DVD mode)
1.
Press PLAY (N).
Start play of the title you are recording.
2.
Press STOP (x) to return to the current recording
screen.
OR
1.
Press TIMESHIFT.
The PIP(Picture-In-Picture) window appears on the
screen as shown below. What is currently being
recorded appears as a PIP and you will hear the
playback audio.
• You can switch between PIP window and Main window
screen by pressing TIMESHIFT.
2.
Press STOP (x) to return to the current recording
screen.
Notes
Notes
Play cannot be started until at least 30 seconds after
recording starts. (MLP mode: after 1 minute)
This function does not work in VCR Recording mode.
This function can operate the DVD-RAM disc only.
Recording from External
Recording from External
Components
Components
You can record from an external component, such as a
camcorder or VCR, connected to any of the Recorder's
external inputs.
1.
Make sure that the component you want to record
from is connected properly to the Recorder. See
page 15.
2.
Press INPUT repeatedly to select the external input
to record from.
AV1: Audio/Video Input mounted on back panel.
AV2: Audio/Video Input mounted on front panel.
DV: DV Input mounted on front panel.
3.
Load a recordable disc.
4.
Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: XP, SP, LP, EP or MLP.
5.
Press z REC once to start recording.
The REC indicator lights in the display window.
6.
Press STOP (x) to stop recording.
Notes Notes
Check that the Audio In settings DV Record Audio
are as you want them. See page 56.
If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See Copyright on page 3 for more details.
Recording continues until you press STOP (x) or the
disc is full.
To record for a fixed length of time, see [Instant
Timer Recording] on page 30.
When unit is on any external inputs mode (AV1, AV2
and DV) the CH +/- buttons don't work, press INPUT
(on remote) repeatedly to select the TV mode, and
then select the TV channels.
33