FCMP OUTDOOR HB4000 Manual

Linking the rain barrel
in series
Please note that the rain barrel has
two in-series spigots to the left and
right side of each barrel. This allows
for unlimited barrel arrangements.
1. To link two barrels, assemble
each barrel as described in the
previous panels.
2. Cut off the end of the In-series
overflow spigot on the right
hand side of one barrel and left spigot on the other. This is best done
with a small hacksaw. You need only trim .25 inch (.6 cm ) off each spigot.
3. Set the two barrels side by side with the open spigots facing each others.
4. Take the small hose that is include in your barrel package. Secure this
hose to each spigot with tiny straps provided.
5. As the first barrel reaches capacity, the overflow water will automatically
flow to the adjacent barrel and store there until needed. Repeat this
process to add additional barrels.

Rain barrel

You're environmentally-friendly water saver.
Congratulations on the purchase of your rain barrel. Making use of free rain
water for your lawn and garden is a smart choice. It not only saves money,
but isn't less of a drain on municipal water, or well-water sources. Plus,
rainwater is healthier for plants.
Forest City Models & Patterns Ltd. Warranty
One (1) Year Warranty on Manufacturer Defects.
Warranty excludes cracking from improper use.
For warranty issues, please contact Forest City
Models & Patterns:
In-Series Spigot
In-Series Spigot
Forest City Models & Patterns Ltd.
157 Gerald Parkway
Thorndale, Ontario, Canada N0M 2P0
Phone: 519-858-5795
Fax: 519-858-9196
e-mail: csr@fcmponline.com
THE HALF BARREL HB4000
Thank you for purchasing our product
www.fcmponline.com
Copyright © 2018 GRANDMARK Ltd.
q