Install Cowling - Yamaha F225C Owner's Manual

Operation
ing device is not properly connected, cool-
ing water can leak out and the engine can
overheat during operation.
1
1. Fitting
2. Flushing device
EMU36940

Install cowling

1. Be sure that all cowling lock levers are re-
leased.
2. Be sure that the rubber seal is seated all
the way around the engine.
3. Place the cowling on top of the seal.
4. Check to be sure it fits properly in the rub-
ber seal.
5. Move the levers to lock the cowling as
shown. NOTICE: If the cowling is not
installed correctly, water spray under
the cowling can damage the engine, or
the cowling can blow off at high
speeds.
[ECM01990]
44
[ECM01800]
2
ZMU06164
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
ZMU06131
ZMU06133