Download Print this page

PEERLESS PTT4323 Series Installation

Two handle roman tub trim kit

Advertisement

Quick Links

Model/Modelo/Modèle
PTT4323
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
Rough-in R2707 required for installation
Rough-in R2707 necesario para la instalación
Rough-in R2707 requis pour l'installation
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
3/32"
(2.38 mm)
Read all instructions prior to installation.
Lea todas las instrucciones antes de hacer la
instalación.
Veuillez lire toutes les instructions avant
l'installation.
To access additional installation help, missing or
replacement parts visit www.peerlessfaucet.com
Para acceder a la asistencia adicional para la
instalación, piezas que falten o de repuesto
visite www.peerlessfaucet.com
Pour obtenir de l'aide supplémentaire pour l'in-
stallation, des pièces manquantes ou des pièces
de rechange, visitez www.peerlessfaucet.com
?
1-800-438-6673
www.peerlessfaucet.com
6/10/2019
105661
1/8"
(3.17 mm)
105661
1
TWO HANDLE ROMAN TUB TRIM KIT
JUEGO DE ACCESORIOS PARA BAÑERAS
ROMANAS
TROUSSE DE GARNITURE POUR ROBINET
DE BAIGNOIRE ROMAINE
1/8" (3.18 mm)
3/32"
(2.38 mm)
105661 Rev. A

Advertisement

loading

Summary of Contents for PEERLESS PTT4323 Series

  • Page 1 TWO HANDLE ROMAN TUB TRIM KIT 105661 JUEGO DE ACCESORIOS PARA BAÑERAS ROMANAS Model/Modelo/Modèle TROUSSE DE GARNITURE POUR ROBINET DE BAIGNOIRE ROMAINE PTT4323 Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. Rough-in R2707 required for installation Rough-in R2707 necesario para la instalación Rough-in R2707 requis pour l'installation...
  • Page 2 NOTE:The deck and valve rough-in must be finished before installing the trim kit. Install handles. Be sure glide ring (1) is properly seated in bottom Unscrew the test cap (1) and discard. Screw bases (2) with gaskets (3) of handle before installing. Tighten set screw (2) using allen wrench. over end valves (4).
  • Page 3 Maintenance Turn faucet handles (1) all the way on. Turn on hot and cold water supplies and flush water lines for one minute. If faucet leaks from spout outlet–Shut off water supplies– Replace Seats and Springs (1). If leak persists–Shut off water supplies–Replace Stem Unit Assembly (2).* Important: This flushes away any debris that could cause *Install stems (2) correctly for proper handle rotation: damage to internal parts.
  • Page 4 Pièces et finis. Tous les pièces (autres que les composants électroniques et les piles) et les finis de ce pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Peerless robiGarantie limitée des robinets Peerless®...