Typecase Flexbook Keyboard Case Manual

Overview

(Package contents: Bluetooth keyboard, Micro-USB cable, user manual)

Connecting

First-time pairing:

• Step 1:Move ON/OFF switch to ON
• Step 2:Press the 'Pair' button for 2 seconds to connect to your iPad, (the Bluetooth indicator flashes)
• Step 3:Toggle Bluetooth On in the Setting app on your iPad (the Bluetooth indicator dies, you are connected)

• Step 4: Tap "Typecase Flexbook" or "360X Keyboard" under "DEVICES" in the Bluetooth section in the Settings app.

For future pairings, please repeat steps 1-3 (if necessary). "Typecase Flexbook" or "360X Keyboard" will appear under My Devices. Tap it to connect.

Installation and Removal

1. Removing back protective piece: hold iPad on both sides and use thumbs togently push off the back cover (see photo.) Cover is held in place by two tabs.
2. Proceed to "peel" cover away from iPad.
3. Take iPad out.
4. Take iPad out upwards.

• Operating distance: 10 meters (33 feet)
• Modulation System: GFSK
• Working voltage: 3.0-4.2V
• Working current: 0.88-3.85mA
• Sleeping current: < 125μA
• Charging current: 500-800mA
• Standby time: 30 days
• Charging time: < 2 hours
• Battery's capacity: 500mAh
• Battery's life span: 3 years
• Key's life span: > 5 million strokes
• Operating temperature: -10 ±55°C

Maintenance

Please preserve the keyboard under normal temperature and recharge under normal voltage.

Rotation

Usage

Charging

iPad adapters

1. Switch on the keyboard
   1. Note: If battery light is flashing, please charge the keyboard.
2. Plug in the charging cable to the keyboard, and then to the power adapter
   1. Battery indicator turns red when keyboard is charging
   2. Battery indicator turns blue when charging is complete
3. To see the current battery status, press the battery key. The status will be shown with the three LED indicator lights
   1. Three blue lights: 70-100%
   2. Two blue lights: 40-70%
   3. One blue light: 10-40%
   4. Flashing red light: <10%

Contact Us

If you have any issues or questions, let us know ASAP! We would love to get you taken care of and happy right away! All units come with a full 12 month warranty, so you can relax and take comfort in your purchase.

For the fastest & friendliest support, contact us (not Amazon) via one of the contact methods below. Our email support is open 24/7/365.

1. Emall: support@typecase.co
2. Phone: 832-303-5080
3. Support link: https://ipadkeyboards.com

Troubleshooting

If the keyboard is not working correctly, please check the following

1. The Bluetooth function on the iPad (or other Bluetooth devices) is enabled.
2. The Bluetooth keyboard is within 33 feet.
3. The Bluetooth keyboard is charged.

If you have unwanted auto-correction or punctuation, please try to change Wireless keyboard's setting on your iPad

4. Connect your iPad to Wireless keyboard.
5. Go to iPad Settings app > General > Keyboard > Hardware Keyboard.
6. Toggle OFF Auto-Capitalization, Auto-Correction, and "." Shortcut.
   (please refer to the figure below)

If fail in connect with bluetooth, please try the following steps

• Delete bluetooth device on the iPad,
• Switch off the Bluetooth function on the iPad
• Reboot the iPad
• Switch on Bluetooth on the iPad
• Switch the keyboard off and on
• Repeat the step to pair the keyboard