Download Print this page
HAMPTON BAY 2052 BLACK Use And Care Manual

HAMPTON BAY 2052 BLACK Use And Care Manual

Square wall lantern

Advertisement

Quick Links

TOOLS REQUIRED
Hammer
Safety goggles
Flathead
Wire strippers
screwdriver
Silicon sealant
Ladder
PACKAGE CONTENTS
A – Screw x 2
Installation
1
Assembling the fixture
IMPORTANT: You must supply a bulb for
this light fixture. 100 watt maximum medium-
base bulb or 26-watt maximum CFL equivalent.
See homedepot.com/lightingfacts for more
information.
Unpack the fixture and lay all parts on a
clean, soft surface.
Screw either the short (D) or long finial (E)
onto the bottom of the fixture body (C).
Install a light bulb (not included) into the
socket of the fixture body (C).
Place the top cover (B) onto the top of the
fixture body (C), aligning the holes.Secure
together using the screws (A).
Phillips screwdriver
Electrical tape
B – Top cover x 1
C – Fixture body x 1
2
Mounting the bracket
CAUTION: Disconnect the power by
turning it off at the circuit breaker or
removing the fuse at the fuse box.
Screw the two mounting screws (FF) into the
mounting bracket (CC). Mount the bracket
(CC) to the outlet box using the two outlet
box screws (EE). Ensure the threads of the
mounting screws (FF) are facing outside
when the mounting bracket (CC) is attached
to the outlet box.
Use and Care Guide
HARDWARE INCLUDED
AA – Lock nut x 2
BB – Wire Connectors x 3 CC – Mounting bracket x 1
DD – Ground screw x 1 EE – Outlet box screw x 2
D – Small finial x 1
3
SKU 240-177 & SKU 240-204
2052 BLACK & 2052 WHITE
Exterior Wall Lantern
Square Wall Lantern
FF – Mounting screw x 2
E – Large finial x 1
Connecting the wires
Wrap the ground wire from the fixture around
the ground screw (DD) on the mounting
bracket (CC), and then connect the ground
wire from the fixture to the ground wire from
the outlet box.
Connect the white wire from the fixture to the
white wire (neutral wire) from the outlet box.
Connect the black wire from the fixture to the
black wire (live wire) from the outlet box.
Cover the three connections using the wire
connectors (BB).
Wrap the connections with electrical tape and
position the wires back inside the outlet box.
HAMPTONBAY.COM
Please contact 855-HD-HAMPTON for further assistance.

Advertisement

loading

Summary of Contents for HAMPTON BAY 2052 BLACK

  • Page 1 SKU 240-177 & SKU 240-204 2052 BLACK & 2052 WHITE Use and Care Guide Exterior Wall Lantern Square Wall Lantern TOOLS REQUIRED HARDWARE INCLUDED Hammer Safety goggles Phillips screwdriver AA – Lock nut x 2 BB – Wire Connectors x 3 CC – Mounting bracket x 1...
  • Page 2 Installation (continued) Installing the fixture □ Place the fixture body (C) to the wall and align the protruding mounting screws (FF) through the appropriate holes on the wall plate portion of the fixture body. Secure the fixture to the wall by threading the lock nuts (AA) over the mounting screws (FF).

This manual is also suitable for:

2052 white240-177240-204