Related Manuals for FS POEX4
Summary of Contents for FS POEX4
- Page 1 4-PORTS 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL 4-Ports 10/100/1000M Gigabit PoE+ Extender User Manual Copyright © 2009-2022 FS.COM All Rights Reserved...
-
Page 2: Table Of Contents
4.1 Three-View Diagram......................................4 4.2 Ports Connection....................................... 5 4.3 LED Indicators........................................6 5. Hardware Installation....................................... 6 5.1 Before Installation......................................6 5.2 Connecting POEX4 to PSE....................................7 5.3 Connecting POEX4 to PD....................................8 5.4 PoE Power Distribution....................................9 6. Power over Ethernet Budget....................................10... -
Page 3: Package Contents
Thank you for purchasing FS 1-port IEEE 802.3bt PoE++ to 4-port IEEE 802.3af/at Gigabit PoE Extender, POEX4. “Gigabit PoE Extender” mentioned in this manual refers to the POEX4. Open the box of the Gigabit PoE Extender and carefully unpack it. The... -
Page 4: Layer 2 Features
PD (powered device) such as IP phone, network camera or wireless access point is a PoE-enabled terminal that consumes energy supplied by PSE. 3. Product Specifications Model POEX4 Hardware Specification 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC” in PoE In Port auto MDI/MDI-X, auto-negotiation RJ45 connector 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC”... - Page 5 4-PORTS 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL Store-and-Forward switch architecture Switch Architecture MAC Address Table 1Mbits Data Buffer 10Gbps Switch Fabric 7.44Mpps @ 64Bytes Switch Throughput IEEE 802.3x pause frame for full duplex Flow Control Back pressure for half duplex 9K bytes Jumbo Frame PoE In Port...
-
Page 6: Hardware Introduction
4-PORTS 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL Standard Conformance FCC Part 15 Class A, CE Regulatory Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet Standard Compliance IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus IEEE 802.3x Flow Control Environment... -
Page 7: Ports Connection
4-PORTS 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL 4.2 Ports Connection Connect the PoE IN port from the following 802.3bt PoE++ PSE devices through a Cat5/5e/6 UTP cable: l 802.3bt PoE++/UPOE/PoH injector PoE IN Port l 802.3bt PoE++/UPOE/PoH injector hub l 802.3bt PoE++/UPOE/PoH Ethernet switch Connect the PoE OUT port to the following 802.3at/af PD devices through a Cat5/5e/6 UTP cable: l PoE IP camera... -
Page 8: Led Indicators
5.1 Before Installation The POEX4 is installed between the PSE and the PD; it is powered by PSE and forwards the Ethernet data and remaining PoE power or an external power supply to the PD. It can be installed easily by just Plug and Play without affecting the data transmission performance. -
Page 9: Connecting Poex4 To Pse
4-PORTS 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL 5.2 Connecting POEX4 to PSE This section describes how to install Gigabit PoE Extender and make connection to it. Please read the following descriptions and perform the procedures in the order being presented. -
Page 10: Connecting Poex4 To Pd
4-PORTS 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL 5.3 Connecting POEX4 to PD Step 1: Connect the additional Cat5e/6 cable that will be used to connect to the remote PD to the “PoE Out” port of the Gigabit PoE Extender. Step 2: The "PoE Out" port is also the power injector which transmits DC voltage to the Cat5e/6 cable and transfer data and power simultaneously between the PSE and PD. -
Page 11: Poe Power Distribution
5.4 PoE Power Distribution The POEX4 can obtain a maximum of 95-watt PoE power from IEEE 802.3bt PoE++ input port and supplies a maximum of 65-watt PoE power budget to four PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3af/802.3at PoE over... -
Page 12: Power Over Ethernet Budget
4-PORTS 10/100/1000M GIGABIT PoE+ EXTENDER USER MANUAL 6. Power over Ethernet Budget The following table lists how many PoE devices can be powered by POEX4: Power Source PoE Output Budget* Max. Number of PDs supported Class 4 PD@25-watt 1 unit...
Need help?
Do you have a question about the POEX4 and is the answer not in the manual?
Questions and answers