For Your Safety - Darkly Labs Emblaser 2 User Manual

3. FOR YOUR SAFETY

The Filtration System is NOT designed to filter toxic fumes
produced from materials such as PCV, Vinyl, ABS etc. Please refer
to your Emblaser 2 User Manual for more details on materials
that may produce harmful fumes.
Air vented from the fume filtration system is not safe to breathe,
especially in high concentrations. Always ensure you use it in a
well ventilated area.
Do not use in wet surroundings
Water and electricity are a dangerous
combination. Ensure your workspace is dry
and not subject to potential wet conditions.
Never use materials containing chlorine
Materials containing chlorine will produce
extremely toxic and corrosive fumes when
laser cut or engraved.
Ensure your material is safe to use
Materials react differently to laser cutting
or engraving depending on their chemical
or physical composition. Some materials
produce harmful fumes that may not be
safely removed by the Fume Filtration
System.
DO NOT USE WITH BANNED MATERIALS
ALWAYS USE IN A WELL VENTILATED AREA
Do not operate if damaged
Damage to any part of the Fume Filtration
System could compromise its safety and
cause injury. If any part of the Fume
Filtration System is damaged, contact your
reseller or Darkly Labs directly before
operation.
Never run your Emblaser 2 unattended
Do not leave unattended while running.
If you see flame or fire - Immediately stop
the machine and extinguish. Not only could
a flame grow into a larger fire, its heat will
cause damage to the internal mechanisms
and optics.