Call Setup - LG VX3200 Training Manual

V X 3 2 0 0
Calling Digits
1 Size
2 Color
5021
Large
Settings
1 Sounds
2 Display
3 System
4 Security
5

Call Setup

Auto-Answer
1 Auto Retry
Off
2 Answer Call
After 1 ring
3 Auto-Answer
After 3 rings
4 One-Touch Dial
5 Voice Privacy
Enable
Speaker
On
Changing the Fonts
Allows you to choose the color and size of your fonts.
1. From the Settings (6) menu, select Display (2).
2. Select Fonts (8).
3. Use the Navigation Key to select from Calling Digits or Text Editor and press OK.
4. Select Size (1), and use the Navigation Key to select from Normal or Large and press OK.
5. Select Color (2), and use the Navigation Key to select from (Black, Blue, Red, Green, or Pink) and press OK.
CALL SETUP
Allows you to designate how the phone handles both incoming and outgoing calls.
Auto Retry
Allows you to set the length of time the phone waits before automatically redialing a number when the
attempted call fails.
1. From the Settings (6) menu, select Call Setup (5).
2. Select Auto Retry (1).
3. Use the Navigation Key to select from (Off, Every 10 seconds, Every 30 seconds, or Every 60
seconds) and press OK.
Answer Call
Allows you to determine how to initiate an answered call.
1. From the Settings (6) menu, select Call Setup (5).
2. Select Answer Call (2).
3. Use the Navigation Key to select from (Flip Open, Any Key, or SEND Only) and press OK.
Auto-Answer
Allows you to select the number of rings before the phone automatically answers a call.
1. From the Settings (6) menu, select Call Setup (5).
2. Select Auto-Answer (3).
3. Use the Navigation Key to select from (Off, After 1 ring or After 3 rings)
and press OK.
Note: This feature is intended for use with hands free devices, but is an independent feature of the phone
and must be manually turned on/off when connected or disconnected from the device.
One-Touch Dial
Allows you to initiate a speed dial call by pressing and holding the speed dial digit.
1. From the Settings (6) menu, select Call Setup (5).
2. Select One-Touch Dial (4).
3. Use the Navigation Key to select from Enable or Disable and press OK.
Auto-Volume
Provides a better audio experience by enabling the Auto Volume feature to control the dynamic range and
volume of the sending and receiving voice across different levels of speaker and environments.
1. From the Settings (6) menu, select Call Setup (5).
2. Select Auto Volume (6).
3. Use the Navigation Key to select from On or Off and press OK.
OTHER NOTABLE SETTINGS
Activating Speakerphone
1. While in standby mode, press the Up Navigation Key with the speakerphone icon, "Speaker On" will
appear on the screen. To deactivate, press the key again and "Speaker Off" will appear on the screen.
4