Advertisement
English
16
3
Lift the roller brush out of the floor nozzle .
4
Remove fluff, hairs and other dirt from the roller brush and the
groove.
Reinserting the roller brush
1
First insert the end of the roller brush furthest from the retainer
into the nozzle, then insert the end of the roller brush closest to the
retainer into the nozzle.
2
Close the retainer ('click').
Note: If the roller brush is not properly inserted, you cannot close the retainer.
storage
1
Put the accessories in the storage compartment of the charging base.
2
Push the stick towards the floor nozzle into the parking position.
Advertisement
