JVC TM-A170G Instructions Manual page 5

REAR VIEW
<Rear Panel>
11
12
13
14
15
External control terminal [REMOTE]
10
Remote terminal for external control.
The input signal (the INPUT function) or the aspect ratio
(the ASPECT RATIO function) can be selected by
external control using a switch cable. Setting of the
INPUT REMOTE or ASPECT REMOTE item in the <SET-
UP MENU> screen is required before using external
control.
Refer to the HOW TO USE EXTERNAL CONTROL on
page 14 for more details.
11
Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
$
terminals .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
Video B terminals [VIDEO B IN/OUT]
12
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
%
terminals .
* Also refer to BASIC CONNECTION EXAMPLE on
page 12.
13 Video B (Y/C) terminals [VIDEO B Y/C IN/OUT]
Y/C (S-video) signal input (IN) and output (OUT) termi-
nals. The output terminal is bridge-connected.
IN : Y/C-separated (S-video) video signal input
terminal
OUT : Bridge-connected Y/C-separated (S-video) signal
output terminal.
VIDEO A
IN OUT
VIDEO B
IN OUT
IN Y/C
OUT
AUDIO A
OUT
IN
AUDIO B
OUT
IN
REMOTE
10
VIDEO A
IN OUT
VIDEO B
IN OUT
IN Y/C
OUT
AUDIO A
IN OUT
AUDIO B
IN OUT
Notes:
* For corresponding audio signals, use the AUDIO B
%
terminals .
* When both VIDEO B terminals are connected (input) at
the same time, the Y/C terminal has priority.
* Also refer to BASIC CONNECTION EXAMPLE
on page 13.
Audio A terminals [AUDIO A IN/OUT]
14
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
!
terminal .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
15 Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B terminals
#
VIDEO B (Y/C) .
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
@
terminals or VIDEO B (Y/C) terminals
* Also refer to BASIC CONNECTION EXAMPLE
on pages 12 and 13.
!
.
@
#
.
5