Advertisement
Quick Links
uniquegardendecor.com
(866) 382-8600
FT-206 Austin Fountain
(5 pieces)
COMPONENTS AND PARTS LIST
FT-206A
29.5" x 18.5" x 10.25"
97 Lbs
FT-206B
12.75" x 8.5" x 16"
105 Lbs
FT-206C
14" x 10" x 8"
41 Lbs
FT-206D
5.75" x 1.75" x 4.75"
4 Lbs
FT-206E
47.5" x 23.5" x 9"
239 Lbs
This fountain
uses cover
FTNCOV-MED
NOTE: Component photos are not to scale
Pump Kit Parts List
PK500 Pump (1)
Approx. 30" of ½" Non-Kink Black Tubing (1)
Approx. 2" of ⅝" Clear Vinyl Tubing (1)
Copper Sleeve (⅝" i.d.) (1)
4 ½" length of ½" i.d/ ⅝" o.d. Copper Pipe (1)
Copper Spiller (2)
4mm Allen wrench (1)
Wedges (3)
Hose Clamps (2)
#10 Compression Stopper (1)
Note – Hose clamps may be used for flow restrictor
Tools you will need
Level
4mm Allen wrench (included)
Revised May 24, 2012
Fountain holds
approximately 17
gallons of water
Advertisement
Related Manuals for Campania International YARDART Austin FT-206
Summary of Contents for Campania International YARDART Austin FT-206
- Page 1 FT-206 Austin Fountain (5 pieces) Revised May 24, 2012 COMPONENTS AND PARTS LIST uniquegardendecor.com (866) 382-8600 FT-206A 29.5” x 18.5” x 10.25” 97 Lbs This fountain Fountain holds uses cover approximately 17 FT-206B FTNCOV-MED gallons of water 12.75” x 8.5” x 16” 105 Lbs NOTE: Component photos are not to scale Pump Kit Parts List...
- Page 2 FT-206 Austin Fountain (5 pieces) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface. 2. This fountain will need to be installed on a surface capable of holding a minimum of 631 pounds in approximately a 7.25 square foot area.