Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd
Step 4: If the customer needs to switch the working mode, it can be controlled by the Mode button to switch between different
working modes (M0 indicator light, M1 indicator light). Press and hold the Mode button for 1 second and then release it to
switch the mode once. The details of the mode switch are shown in the following table:
Categories
Mode 0
Normal Mode
Wake-up
Mode 1
Mode
Power-saving
Mode 2
Mode
Mode 3
Sleep Mode
Note: The DTU has the function of power-down saving mode (the factory default setting is transparent transmission
mode), the user needs to switch the corresponding mode according to the M1 and M0 indicators (effective
immediately).
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd
M0
M1
Open UART and RF，transparent transmission is on
OFF
OFF
( factory default )
Transmitting WOR mode, the packet comes with a
ON
OFF
preamble code
Receiving WOR mode, saving receive power, the mode
OFF
ON
can not be transmitted
ON
ON
Parameter setting using the configuration software
E800-DTU(433Lxx-485)-V8 UserManual
Description
3
Advertisement
Table of Contents
