Next HARTFORD 865183 Assembly Instructions

Coffee table

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.

PRODUCT INFORMATION

• Made from Pine with NC lacquer finish.
• Made in China.
• Natural features ensure that each piece is individual. Every effort is made to ensure colour continuity between
pieces, however this is a natural product, slight colour variations and natural grain markings may occur.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching
or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
865183 HARTFORD COFFEE TABLE
ASSEMBLY INSTRUCTIONS.
Page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HARTFORD 865183 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Next HARTFORD 865183

  • Page 1 865183 HARTFORD COFFEE TABLE ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel: 0333 777 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
  • Page 2 • All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary. FITTINGS PARTS Page 2 of 5...
  • Page 3 STEP ONE 1. Insert 2 x wood dowel E to rail (1) 2. Insert 3 x wood dowel E to 2 x slash rails (2) 3. Insert 2 x wood dowel E and insert 1 x cambolt A to 2 x foot units (3) and tighten with a screwdriver. Page 3 of 5...
  • Page 4 STEP TWO 1. Attach 2 x foot units (3) to rail (1). 2. Insert bolt nut B & screw nut C to rail B and tighten with a screwdriver. STEP THREE 1. Attach 2 x slash rails (2) to rail (1) Page 4 of 5...
  • Page 5 1. Attach top panel (4) to assembled unit and secured by 8 x screws F tighten with Allen key G 2. Insert 2 x screws D through slash rail (2) and tighten with screwdriver. Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT Page 5 of 5...

Table of Contents