Page 1
The Instruction of Adjustment of BK3 Models’ Table Level Step 1 Move the cutting head of the machine to the original point(zero point). Install the dial gage. Find the screw under the table, and then switch the screw point under the first panel with a wrench.
Page 3
When the table not even during the machine working, first remove the felt, then adjust the table according to the above steps. After this, use the 498 glue to bond the felt again. Hangzhou IECHO Science & Technology Co., Ltd. Tel: +86-571-8660 9560 No.1 Building, No.1 Weiye Road, Binjiang District, Hangzhou 310053, China.