Advertisement
MacOS
1
Click on the Airport/Wi-Fi icon at the top right corner of the screen as shown below. Click Turn Wi-Fi On.
you cannot see an Airport icon, your wireless adapter may not be installed or inserted correctly.
Note – If
Please refer to your Mac user guide before continuing with the steps in this guide
2
A list of Wi-Fi networks including your WiFi network name/SSID is displayed (in this example, it is "NetComm 8386").
Click your WiFi network name/SSID to connect to this network.
3
Enter your WiFi security key/password and click Join to connect to the WiFi network.
If you enter an incorrect WiFi security key, a message will appear, and you will be prompted to enter the correct key
again.
4
The Airport icon will now have black lines to indicate signal strength. To see if the computer is connected, click on the
Airport icon again. Your WiFi network has a tick next to its name.
The wireless network configuration is complete and you can now use the Internet. You can disconnect the Ethernet
cable, if you wish.
6 of 6
© NetComm Wireless 2017
.
Wireless Setup Guide
Advertisement
