Page 7
When positioning the appliance, ensure the supply cord is not trapped or damaged. Do not locate multiple portable socket-outlets or portable power suppliers at the rear of the appliance. -45-...
REVERSING THE DOOR Caution: • Make sure that the appliance is empty and disconnected from the power net. • To reverse the door, you need to tip the appliance backwards. Make sure that the appliance can lean on something firm and stable, so that it does not slip away while reversing the door.
INSTALLATION Caution: • Unpack the appliance and check whether the appliance has suffered any damages. Do not connect the appliance to the power net if it is damaged. • It is recommended to wait 4 hours before connecting the appliance to a socket, so that the oil can flow back to the compressor.
Page 21
Do not use any detergents or abrasive powders as they may damage the finish. Caution: • Do not place any hot objects onto the plastic parts of the appliance. • Do not place anything directly against the rear wall inside the appliance.
2. The door balconies can be placed at different heights inside the door. Gradually lift the balconies to remove them and slide them back into the desired position. Energy saving tips • Do not place any warm foods inside the appliance.
Page 23
Thawing the freezer Excessive ice inside the freezer should be removed. Do not use any sharp objects to remove the ice. Use a plastic scraper. If the ice is too thick to be scraped off, then thaw the freezer as follows: 1.
Page 28
TABTOP SRT1004X Commercial reference : 4894223220613 Household refrigerating appliance model category Refrigerator table top Energy efficiency class A+++ (the highest energy efficiency) to D (the lowest efficiency) Annual energy consumption (AEc) 172 kWh/an Energy consumption of 172 kWh per year, calculated based on the result obtained for 24 hours under standardized test conditions.
Need help?
Do you have a question about the TABTOP SRT1004X and is the answer not in the manual?
Questions and answers