LABBOX KJD20 User Manual page 11

4. Operation Modes For the Kjeldahl Distillation Unit After Start-up
The Kjeldahl Distillation Unit will enter the initial interface shown in Fig. 1 after start-up:
The initial interface provides three modes: test, maintenance and help. You may use 【Left】 and
【Right】 key to target "test" button and press 【OK】key for the test mode. See Fig. 2
You may use 【Left】 and 【Right】 key to target the desired operation setting and press 【OK】
key for next interface. Press 【Auto】key for automatic test parameter interface, or press 【Manual】
key for manual test interface.
Fig. 1
Fig. 2
11