Cerio HS Series User Manual

HS-Series HS-1008M
8 Port 10/100/1000/2500M Multi Gigabit Switch
FCC Certifications
This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received; including
interference that may cause undesired operation.
CE Mark Warning
This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class A for ITE,
the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
Company has an on-going policy of upgrading its products and it may be possible that information in this
document is not up-to-date. Please check with your local distributors for the latest information. No part of this
document can be copied or reproduced in any form without written consent from the company.
Trademarks:
All trade names and trademarks are the properties of their respective companies.
Copyright © 2016, All Rights Reserved.
Unpacking Information
Thank you for purchasing our HS-Series products. Before installation,
please check that your package contains the following items.
Open the shipping cartons of the switch and carefully unpack its
contents. The carton should contain the following items:
1. HS-1008M Main Unit x 1
2. Power Adapter x 1
3. User's Guide Quick Installation Guide Booklet x 1
4. Warranty Card x 1
Application
User's Guide
Introduction
CERIO HS-1008M is a plug & play ultra-high speed and
high-performance network switch. It supports 8 port
10/100/1000/2500Mbps Multi Gigabit Ethernet ports. All ports support
Auto-Negotiation traffic modulation function, which helps to optimize the
transmission speed and performance of each connected device. It
supports existing conventional 10/100/1000Mbps Gigabit Ethernet
equipment and new generation 2.5GbE network equipment. Whether
you want to upgrade the office network or home use, HS-1008M can
achieve faster and smoother bandwidth and transmission capabilities
for you to achieve more flexible network applications
CERIO HS-1008M can use existing CAT 5e cables to enjoy
ultra-high-speed network transmission, it's eliminating construction
costs, and realizing economical network upgrades. HS-1008M with
fanless design, simple and convenient operation, no need to configure
software, plug and play. It's able to meet the hyper-converged
large-scale data centers, AI applications, 4K high-quality image
transmission, WiFi 6 wireless base stations, cloud data centers needs,
etc., and provides stable and efficient transmission. The HS-1008M
defines new green power saving idea in all Ports. Using the 802.3az
Energy Efficient Ethernet standard, the network will automatically
decrease the power usage when traffic is low with no setup required.
Moreover, it supports desktop and wall mounting installation, making it
more convenient and safer for you to use.
Highlight Features
 Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
IEEE802.3ab 1000Base-T, IEEE802.3bz 2.5G BASE-T and IEEE 802.3az
EEE specifications.
 8 Port 10/100/1000/2500Mbps TX Auto-Negotiation Ethernet Switch.
 Supports Energy-Efficient Ethernet (EEE) , IEEE 802.3az standard.
 Half/Full-duplex capability on each TX port Auto-learning networking
configurations.
 Supports Store & Forward architecture and performs forwarding and filtering.
 IEEE802.1x flow control for Full-duplex, Back Pressure function for
Half-duplex operation.
 Provides 12K Jumbo frames to improve network utilization of a large file
transfers.
 Non-blocking & Non-head-of-line blocking full-wire speed forwarding.
 Supports TP interface Auto MDIX function for auto TX/RX swap.
 Automatic Source MAC Address Learning and Aging.
 Supports up to 16K MAC addresses.
 Supports 12Mb buffer memory.
 Supports desktop and wall mounting installation.