Powering Matrox Ds1; Matrox Ds1 Power Supply And Adapter Plugs - Matrox DS1 User Manual

4

Powering Matrox DS1

To power Matrox DS1, connect the power supply cable to DS1 and an AC outlet
as shown in this section. To remove power from DS1, unplug the power supply
cable from the AC outlet.

Matrox DS1 power supply and adapter plugs

Matrox DS1 provides a power supply cable with international adapter plugs for
use in different regions:
• To remove an adapter plug from the power adapter, hold down the button on
the adapter plug, and then slide the adapter plug up until it releases from the
power adapter.
• To insert an adapter plug into the power adapter, ensure that the adapter plug
is properly aligned with the corresponding slot on the power adapter, and
then slide the adapter plug down into the power adapter until it locks into
place.
Chapter 2, Connecting and Using Matrox DS1
1
0
Removing an adapter plug
Adapter
plug
Power
adapter
Inserting an adapter plug