Master Clear ..........15 and brand. Code List ............16 Product Operation .......... 21 Thank you for buying a Philips Magnavox remote Troubleshooting ..........22 and we hope it will give you many years of service.
Setup Battery Installation Power-On Default 1. On the back of the remote, The remote powers on in TV mode. push down on the tab and lift the cover off. TV Volume/Mute Punch-Through 2. Match the batteries to the + and - marks inside the The TV Volume/Mute punch-through feature lets you battery case, then insert 2 control the Volume and Mute function of your TV in any...
Button Functions, cont. Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. Prev. Ch. may be called RECALL, or VOLUME Up/ CHANNEL Up/ ENTER may be called DISPLAY. These differences Down Changes Down Changes the depend on the brand and model of your product.
Advanced Button Functions TV/VCR Punch-Through Scan+ and Scan- buttons control the speed of Fast VCR Punch-through is automatically available in TV and Forward and Reverse Playback respectively. Cable Modes only i.e. the 6 VCR keys (Play, Pause, Stop, Chapter+ and Chapter- buttons respectively locate the Record, FF and Rewind) will punch-through to the succeeding or preceding Chapters or Tracks on a disc.
Code Entry Direct Code Entry Programming with Code Search 1. Press and hold the Code Search button until the red 1. Manually turn on the device (TV, VCR, etc.) to be indicator stays on. Release the Code Search button. controlled. 2.
Sleep Timer Code Identification The Sleep feature enables the remote to turn off the TV Code Identification after a period of 1 to 99 minutes. Remote is to be in TV mode to set a Sleep Timer. This feature works even if 1.
Code Learning, cont. Code Learning, cont. Learning Commands To Clear all Learned Commands under a mode 1. Press and hold the Code Search button until the red 1. Press and hold the Code Search button until the indicator stays on. Release the Code Search button. indicator light turns on.
Troubleshooting Notes Remote does not operate your product. • Press the mode button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) •...
Page 13
Should a defect occur under normal operating conditions within 90 days from the date of purchase, PHILIPS MAGNAVOX will provide a comparable replacement free of charge within the warranty period, to the original purchaser.