Operation Mode; Remote Control Operations - LG LSC091PMA Owner's Manual

Operating Instructions

Remote Control Operations

The controls will look like the following.
Controls
5
6
4
2
7
ON
11
8
13

Operation Mode

Cooling Operation
Auto Operation or Auto Changeover
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model(
12 Room Air Conditioner
Signal transmitter
1
3
10
CANCEL
9
SET
OFF
12
AUTO CLEAN
C/ F
15
14
Flip-up door
(opened)
1. START/STOP BUTTON
Operation starts when this button
is pressed and stops when the button
is pressed again.
2. OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3. ROOM TEMPERATURE
SETTING BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SELECTOR
Used to select fan speed in four steps
low, medium, high and CHAOS.
5. JET COOL/HEATING(OPTIONAL)
Used to start or stop the speed
cooling/heaing.(speed cooling/heating
operates super high fan speed in
cooling/heatig mode.)
6. CHAOS SWING BUTTON
Used to stop or start louver movement and
set the desired up/down airflow direction.
7. ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping
operation. (See page 19)
8. TIME SETTING BUTTONS
Used to adjust the time. (See page 19)
9. TIMER SET/CANCEL BUTTON
Used to set the timer when the desired time is
obtained and to cancel the Timer operation. (See
page 19)
10. SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
(See page 19)
11. AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or
heating. (See page 20)
12. ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
13. RESET BUTTON
Used prior to resetting time.
14. 2nd F Button
Used prior to using modes printed in blue at the
bottom of buttons. (See page 18)
15. °C TO °F SWITCHING BUTTON
Used to switch temperature reading from
Centigrade to Fahrenheit.
)