Unit Installation - LG LP070CED Service Manual

3.2.3 UNIT INSTALLATION

1. Remove the shipping screw from the ventilation door.
(See Figure 17)
2. Remove the front gille by pulling it out at the bottom to
release it, then lift it up along the unit top front.
(See Figure 18)
3. Slide the unit into the wall sleeve and secure with 6 screws
through the unit flange holes. (See Figure 19)
4. Reinstall the front grille by hooking the top over the unit top,
then pushing it in at the bottom. (See Figure 20)
Figure 17
Figure 18
Figure 19
Figure 20
—29—