Siemens SIMATIC PG 720 P Product Information Bulletin page 5

Changing the With the keyboard open, you can incline the unit to any angle between 0 and
Angle of
90 . Proceed as follows:
Inclination
1. Pull the extra slide-out support out of the rear of the stand and if
2. Incline the unit to the angle you prefer.
Note
When changing the angle of inclination, ensure that the keyboard cable does
not get trapped between the device and the stand.
We recommend you place your device in an upright position during permanent
operation (for example, status display) in an environment with a high ambient
temperature. This ensures better conditioning through the ventilating slots.
Caution
!
Risk of injury!
There is a danger of the unit tipping over if it is set up without extra support
and at an angle of inclination of more than 15 .
If the angle of inclination is greater than 15 , you must use the extra
slide-out support in the stand.
PG 720 P Product Information Bulletin
C79000-K7076-C721-01
necessary pull out the additional support hoop.
SIEMENS
PG 720
3