Package Contents; Description (Fig. A); Markings On Tool - DeWalt XR FLEX VOLT LI-ION DCS520 Quick Start Manual

Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other than
e
the designated D
charger may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCS520 operates on a 54 volt battery pack.
The DCB546, DCB547, DCB548 battery packs may be used. Refer
to Technical Data for more information.

Package Contents

The package contains:
1 Plunge saw
1 Hex wrench
1 Li-Ion battery pack (T1 models)
2 Li-Ion battery packs (T2 models)
3 Li-Ion battery packs (T3 models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.

Markings on Tool

The following pictograms are shown on the tool:
Read instruction manual before use.
WALT batteries with a D WALT
e e
Wear ear protection.
Wear eye protection.
Maximum depth of cut
Blade diameter
Date Code Position (Fig. A)
The date code 16 , which also includes the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture

Description (Fig. A)


WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1 Plunge trigger
On/off switch
2
Main handle
3
4 Shoe
Rail adjustment knobs
5
Bevel scale
6
Bevel adjustment knobs
7
Depth adjustment knobs
8
Depth scale
9
Blade
10
Front handle
11
Spindle lock button
12
Spindle lock lever
13
Battery pack
14
Battery release button
15
Date code
16
Dust extraction outlet
17
Anti-kickback knob
18
Speed wheel
19
Fuel gauge
20
Intended Use
The DCS520 cordless plunge saw is designed for professional
sawing of wood products.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This heavy-duty plunge saw is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
English
13