Table of Contents
Advertisement
** Make sure the filter has been assembled correctly as figure before adding beans or powder.
** Do not fill the beans into the hot water pipe, otherwise the appliance could malfunction.
2.
Uncover the water tank lid and fill with fresh cold water to required level. Then close the water tank lid.
Tips: You can use the jug with level marking to measure the quantity of water approximately.
3.
Lock the lid by pressing downwards until heard the click.
4.
Place the jug on the warm plate.
Connect power plug. A "bi" sound is heard. The appliance is stand by for operation.
5.
Switch on the appliance by turning the control knob dial clockwise from "OFF" to "Beans" or " Powder"
6.
position, the on/off & working indicator light will light up. Press the "START" button, the appliance starts to
work, the on/off & working indicator light flickers. ( see picture 1 & picture 2)
Advertisement
Table of Contents
