Cold Wash; Turbo Wash; Fresh Care; Setting Options During Cycle - LG WM4370HA Owner's Manual

NOTE
The steam option cannot be used with all cycles.
y
y Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
y Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.

Cold Wash™

Adding the Cold Wash™ option reduces energy
usage and provides the same washing performance
as a warm water wash.
By using six different washing motions (tumbling,
rolling, stepping, scrubbing, swing, and filtration)
fabrics are cleaned while reducing energy usage.
B
A
1
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
C
4
Press .
NOTE
When you select the Cold Wash™ option, wash
y
time will be increased up to ten minutes.
y For high wash efficiency, load less than eight
pounds of laundry.

Turbo Wash™

Adding the Turbo Wash™ option reduces cycle time
and provides good performance in normal cycle.
By using the Turbo Wash™, We can save the time
without sacrificing performance.
B
A
1
Press and turn
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
C
4
Press .
NOTE
The Turbo Wash™ option cannot be used with
y
all cycles.
y Turbo Wash™ is available in the beginning of
the Cotton/Normal and Perm. Press cycles.
y Press and hold the Turbo Wash™ button to
change the default settings.
to the desired cycle.
to the desired cycle.

Fresh Care

Use this function when you are not able to take out
your clothes as soon as the wash cycle ends.
This function provides periodic tumbling for up to
about 19 hours to prevent wrinkles. Press the Start/
Pause or Power button to unload laundry at any
time.
B
A
1
Press and turn
2
Press and hold
- The light ( ) will turn on.
3
Select any desired options.
- Skip to step 4 if you would like to use the
default settings without changing or adding any
options.
C
4
Press .

Setting Options During Cycle

You can add the desired options during the wash
cycle.

Child Lock

This feature locks the controls to prevent children or
others from changing the cycle settings by pressing
the buttons during the cycle. The feature does not
lock the door.
Enabling Child Lock
Press and hold for three seconds during the
wash cycle.
- When Child Lock is enabled, a N message and the
remaining wash time are displayed, in turn, on the
display panel of the washing machine.
Disabling Child Lock
Press and hold for three seconds during the
wash cycle.
NOTE
Once the washer has shut off, the Power button
y
allows the machine to be turned on, but the
controls are still locked. Press and hold the Pre
Wash button for three seconds to disable Child
Lock.
OPERATION
to the desired cycle.
for three seconds.
27