Delay Wash; Steam; Cold Wash; Turbo Wash - LG WM8100HVA Owner's Manual

Delay Wash

You can set the desired start time.
B
A
1
Press and turn to the desired cycle.
2
Press the desired option to use the other options.
3
Press repeatedly to select the desired start
time.
- light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time
by one hour, up to 19 hours.
C
4 Press .

Steam

Adding the Steam option to these cycles help to
enhance washing performance.
By using a hot steam fabrics get the cleaning benefits
of a super hot wash.
B
A
1
Press and turn to the desired cycle.
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
C
4 Press .
WARNING
Do not touch the door during steam cycles. The
door surface can become very hot. Allow the
door lock to release before opening the door.
Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
NOTE
The steam option cannot be used with all cycles.
Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.

Cold Wash™

Adding the Cold Wash™ option reduces energy
usage and provides the same washing performance
as a warm water wash.
By using 6 different washing motion (Tumbling,
Rolling, Stepping, Scrubbing, Swing, Filtration),
fabrics get the cleaning benefits, without the energy
usage.
B
A
1 Press and turn to the desired cycle.
2 Press . The washer will automatically
adjust the cycle settings.
3 Set any other desired options.
C
4
Press .
NOTE
When you select the Cold Wash™ option, wash
time will be increased up to 10 minutes.
For high wash efficiency, it is recommended to
use less than 8 pounds.

Turbo Wash™

Adding the Turbo Wash™ option reduces cycle time
and provides good performance in normal cycle.
By using the Turbo Wash™, We can save the time
without sacrificing performance.
B
A
1
Press and turn to the desired cycle.
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
C
4
Press .
NOTE
The Turbo Wash™ option cannot be used with
all cycles.
Turbo Wash™ is available in the beginning of
the Cotton/Normal and Perm. Press cycles.
Press and hold the Turbo Wash™ button to
change the default settings.
OPERATION 27