Page 1
WI-FI weather station with 7-In-1 professional sensor Model: C6081A User Manual * POLE IS FOR ILLUSTRATION PURPOSE. IT'S NOT INCLUDED.
Page 2
ABOUT THIS USER’S MANUAL This symbol represents a warning. To ensure safe use, always adhere to the instructions described in this documentation. This symbol is followed by a user’s tip. PRECAUTIONS - Keep and reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings, export data lost and any consequences that occur should an inaccurate reading take place.
INTRODUCTION Thank you for selecting WI-FI weather station with 7-in-1 professional sensor. This system gathers and automatically uploads accurate and detail weather data to Weather Underground and Weathercloud website - the famous weather service which allows weather observers to upload their local weather data with automated personal weather stations (PWS) - at which you can access and upload your weather data freely.
INSTALLATION AND SETUP Your console can pair up with one wireless 7-in-1 outdoor sensor and up to 7 wireless indoor sensors. (1pc wireless indoor sensor included) INSTALL WIRELESS 7-IN-1 SENSOR Your wireless 7-IN-1 sensor measures wind-speed, wind-direction, rainfall, UV, light intensity, temperature and humidity for you.
INSTALL WIRELESS INDOOR SENSOR 1. Remove the battery door of the sensor. 2. Use the channel slide switch to set the channel number for the sensor (e.g. Channel 1) 3. Insert 2 x AA size batteries into the battery compartment and close the battery door according to the polarity information marked on the battery compartment.
1. Remove the battery door of the console. 2. Insert 3 new AAA batteries as per the polarity indicated, 3. Replace the battery door. BUILT-IN MEMORY The console has built-in FLASH memory that holds the vital settings. These include: - Time Zone, DST status, Time SYNC status, WI-FI and Weather server setting, Latitude / Longitude, Hemisphere setting, Calibration values, and Sensor ID of paired sensor(s) RESET AND FACTORY HARD RESET To reset the console and start again, press the [ RESET ] key once.
CREATE WEATHER SERVER ACCOUNT & SETUP WI-FI CONNECTION The console can upload weather data to WUnderground and / or Weathercloud through WI-FI router, you can follow the step below to setup your device. NOTE: The Weather Underground and Weathercloud website are subjected to change without notice. CREATE WEATHER UNDERGROUND ACCOUNT 1.
5. Jot down Your "Station ID" and "Station key" for the further setup step. CREATE WEATHERCLOUD ACCOUNT 1. In https://weathercloud.net enter your information in "Join us today" section, then follow the instructions to create your account. NOTE: Use the valid email address to register your account. 2.
Page 12
3. Enter all the information in Create new device page, for the Model* selection box select the "W100 Series" under "CCL" section. for the Link type* selection box select the "SETTINGS", Once you have completed, click Create. 4. Jot down your ID and key for the further setup step.
SETUP WI-FI CONNECTION 1. When you power up the console for the first time, the console LCD will show flashing "AP" and " " icon to signify that it has entered AP (Access Point) mode, and is ready for WI-FI settings.
SETUP THE WEATHER SERVER CONNECTION Enter the following information into the below web interface "SETUP" page to connect the console to weather server, If you do not want to use Wunderground.com or Weathercloud.net, please empty the station ID & key to ignore the data upload. SETUP page SETTINGS Press "ADVANCED"...
TIME SERVER CONNECTION STATUS After the console has connected to the internet, it will attempt to connect to the internet time server to obtain the UTC time. Once the connection succeeds and the console's time has been updated, the “ ”...
NOTE: - Calibration of most parameter is not required, with the exception of Relative Pressure, which must be calibrated to sea-level to account for altitude effects. - Indoor temperature and humidity calibration values are not applicable for this console. VIEW YOUR WEATHER DATA IN WUNDERGROUND To view your weather station live data in a web browser (PC or mobile version), please visit http:// www.wunderground.com, and then enter your “Station ID”...
FIRMWARE UPDATE The console supports OTA firmware update capability. Its firmware may be updated over the air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity. Update function, however, is not available through mobile/smart devices. Current firmware Firmware version: 1.00 Please to select the firmware file for version...
NOTE: - In normal mode, press [ CLOCK SET ] key to switch between year and date display. - During the setting, you can press and hold [ CLOCK SET ] key for 2 seconds to back to normal model. DAYLIGHT SAVING TIME (DST) DST function is set to "AUTO"...
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION 1. In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds. 2. When the alarm time displays, press [ ALARM ] key again to activate the alarm function. Or press [ ALARM ] key twice to activate the alarm with ice pre-alarm function.
VIEW THE OTHER INDOOR CHANNELS (OPTIONAL FEATURE WITH ADD ON EXTRA SENSORS) This console is capable to pair with a wireless 7-IN-1 sensor and up to 7 wireless indoor sensors. If you have 2 or more Indoor sensors, you can press [ CHANNEL ] key to switch between different wireless channels in normal mode, or press and hold [ CHANNEL ] key for 2 seconds to toggle auto-cycle mode to display the connected channels at 4 seconds interval.
Page 21
BEAUFORT SCALE TABLE The Beaufort scale is an international scale of wind velocities ranging from 0 (calm) to 12 (Hurricane force). Beaufort Scale Description Wind Speed Land Condition < 1 km/h < 1 mph Calm Calm. Smoke rises vertically. < 1 knots <...
≥ 118 km/h Severe widespread damage to vegetation ≥ 74 mph Hurricane force and structures. Debris and unsecured ≥ 64 knots objects are hurled about. ≥ 32.7m/s WEATHER INDEX At the WEATHER INDEX section, you can press [ INDEX ] key to view different weather index in this sequence: FEELS LIKE DEWPOINT HEAT INDEX...
NOTE: - The accuracy of a general pressure-based weather forecast is about 70% to 75%. - The weather forecast is reflecting the weather situation for next 12~24 hours, it may not necessarily reflect the current situation. - The SNOWY weather forecast is not based on the atmospheric pressure, but based on the temperature of outdoor.
NOTE: To ensure to have correct data, please reset all the rainfall record when you reinstall your wireless 7-IN-1 sensor to other location LIGHT INTENSITY, UV INDEX & SUNBURN TIME This section of display show the sunlight intensity, UV index and sunburn time. Press the [SUN] key to change the mode.
pressure MIN relative pressure MAX absolute pressure MIN absolute pressure MAX rain rate. TO CLEAR THE MAX/MIN RECORDS Press and hold [ MAX / MIN ] key for 2 seconds to reset the current on display MAX or MIN records. NOTE: The LCD will also display the "...
MAINTENANCE BATTERY REPLACEMENT When low battery indicator “ ” is displayed in OUT or CH section, it indicates that the outdoor 7-IN-1 sensor and current channel sensor battery power is low respectively. Please replace with new batteries. WIRELESS 7-IN-1 SENSOR MAINTENANCE CLEANING THE RAIN COLLECTOR 1.
Data not reporting to 1. Ensure your Station ID and Station Key are correct. Wunderground.com or 2. Ensure the date and time is correct on the tablet . If incorrect, you may be reporting old data, not real time data. weathercloud.net 3.
Page 29
Hour format 12hr AM / PM or 24 hr Date display DD / MM or MM / DD Time synchronize method Through Internet time server to synchronize the UTC Weekday languages EN / DE / FR / ES / IT / NL / RU +13 ~ -12 hour Time Zone AUTO / OFF...
Page 30
0 ~ 112mph, 50m/s, 180km/h, 97knots Wind speed display range Resolution mph, m/s, km/h and knots (1 decimal place) Speed accuracy < 5m/s: +/- 0.5m/s; > 5m/s: +/- 6% (whichever is greater) Display mode Gust / Average Memory modes Historical Data of past 24 hours, Max Gust / Average Alarm Hi Wind Speed Alert (Average) Wind direction display mode...
WIRELESS 7-IN-1 SENSOR Dimensions (W x H x D) 322 x 296 x 217mm (12.7 x 11.7 x 8.5in) Weight 674g (with batteries) 3 x AA size 1.5V batteries Main power ( Lithium batteries recommended) Temperature, Humidity, Wind speed, Wind direction, Rainfall, UV Weather data and light intensity RF transmission range...
Page 32
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.
Need help?
Do you have a question about the C6081A and is the answer not in the manual?
Questions and answers