Set The System Date And Time; Enable/Disable Hotkey Mode; Enable/Disable Always-On; Update Uefi/Bios - Lenovo 100e Windows 2nd Gen User Manual

Note: For computers with Hotkey mode enabled, press Fn + F12.
2. Select the device that you want the computer to start from and press Enter.

Set the system date and time

1. Start the UEFI/BIOS setup utility.
2. Select Configuration ➙ System Time / System Date and set the system date and time as desired.
3. Press Fn+F10 to save changes and exit.

Enable/Disable hotkey mode

1. Start the UEFI/BIOS setup utility.
2. Select Configuration ➙ Hotkey Mode and press Enter. Change the setting to Disabled or Enabled.
3. Select Exit ➙ Exit Saving Changes.

Enable/Disable always-on

1. Start the UEFI/BIOS setup utility.
2. Select Configuration ➙ Always On USB and press Enter. Change the setting to Disabled or Enabled.
3. Select Exit ➙ Exit saving changes.

Update UEFI/BIOS

When you install a new program, device driver, or hardware component, you might need to update UEFI/
BIOS.
Download and install the latest UEFI/BIOS update package by one of the following methods:
• From Lenovo Vantage:
1. Open Lenovo Vantage. See "Use Lenovo Vantage" on page 12.
2. Click System Update. In the Lenovo System Update section, click Check for updates. The
available update packages are displayed and categorized by critical, recommended, or optional.
3. If the latest UEFI/BIOS update package is available, select the package and click Install selected.
Then, the update package will be downloaded and installed automatically.
• From the Lenovo Support Web site:
Go to
https://support.lenovo.com
instructions to download and install the latest UEFI BIOS update package.

Recovery information

This section introduces the recovery information of the Windows 10 operating system. Ensure that you read
and follow the on-screen recovery instructions. The data on your computer might be deleted during the
recovery process. To avoid data loss, make a backup copy of all the data that you want to keep.

Reset your computer

In the resetting process, you can choose to keep your files or remove them when you reinstall the operating
system.
Note: The items in the graphical user interface (GUI) might change without notice.
1. Open the Start menu, and then click Settings ➙ Update & Security ➙ Recovery.
30
Lenovo 100e/300e Windows 2nd Gen User Guide
and select the entry for your computer. Then, follow the on-screen