Setting Sounds For Your Phone - Kyocera Switch_Back Switch_Back User Manual

Changing your personal ringtone
Your Switch_Back phone has multiple ringtones
you can choose to use for incoming calls from
your Personal group.
→
Select
1. Menu Settings
.
Personal ringers
Scroll down the list to hear the different rings
2.
and press to select one.
Downloaded ringtones are added to the
Note:
end of the standard list of ringtones.

Setting sounds for your phone

You can set your phone to sound tones when you
open and close the flip and when you turn the
phone on and off. Sounds will not occur during
an incoming call, if you are in a call, or if a
headset or car kit is attached to your phone.
Set sound when flip opens
→
Select
1. Menu Settings
.
Flip open
Scroll through the list to hear the sounds and
2.
press to select one.
Set sound when flip closes
→
Select
1. Menu Settings
.
Flip closed
Scroll through the list to hear the sounds and
2.
press to select one.
52
→ →
Sounds
→ →
Sounds
→ →
Sounds
Set sound when phone powers on
or off
→
• Select
Menu Settings
→
Pwr on/off sound
– To deselect this sound, select
Adjusting volume
You can adjust the earpiece, speakerphone, and
ringtone volume as well as key tones.
Adjusting the ringtone volume
→
Select
1. Menu Settings
.
Ringtone volume
Press right to increase the volume, or left
2.
to decrease the volume.
Press the left softkey
3.
Adjusting key tone volume
You can change the volume of the tones the phone
makes when you press the keys.
→
Select
1. Menu Settings
.
Key volume
Press right to increase the volume, or left
2.
to decrease the volume.
Press the left softkey
3.
Setting key length
You can change the duration of the tones the
phone makes when you press the keys.
→
Select
1. Menu Settings
.
Key length
→ →
Sounds
.
Enabled
Disabled
→ →
Sounds
to select
Save
→ →
Sounds
to select
Save
→ →
Sounds
Customizing Your Phone
.
.
.