Using The Camera; Accessing Picture Mode - Kyocera Switch_Back Switch_Back User Manual

11 U
SING THE
Tips before operating your
camera
• You cannot activate the camera while
on a call.
• Once the camera is active, the main screen
acts as the viewfinder.
• If you get a "Low memory" error, check your
resolution and quality compression settings.
See "Setting up the camera" on this page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous screen.

Accessing picture mode

The camera can be used with the flip open
or closed.
Flip closed
Press the external camera key until you hear one
beep to activate picture mode.
Flip open
Press until you hear one beep to activate
picture mode.
User Guide for Switch_Back
C
AMERA
Camera settings
Press and hold
1.
picture mode.
Press the right softkey
2.
.
Options
Press to select
3.
Highlight an option and press
4.
– options are On, Off, or Automatic.
Flash
– options are 640 x 480,
Resolution
320 x 240 (best for sending to email), and
160 x 120.
–
Low Light Mode
low light environments.
– options are Off (default) or 3,
Self Timer
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot
– allows you to take up to six
Multishot
multiple pictures while the camera key is
pressed and held. A tone plays each time a
picture is taken. A second tone plays when
the final picture is taken.
–
Shutter Sound
the camera takes a picture.
to activate
to select
.
Settings
:
brightens the picture for
mode is activated.
sets the sound used when
43