Advertisement
CLEAN (ONE TOUCH CLEAN) OPERATION
Drying indoor heat exchanger after cooling operation to prevent mildew.
NOTE
When CLEAN operation fi nish, unit will switch OFF automatically.
●
If Weekly Timer or Once Timer is set, there is a need to cancel those timer before operating CLEAN
●
function.
For multi model connections, when pressing
●
operation.
■ To start CLEAN operation
Press
●
Total time taken for One Touch Clean operation is 60 minutes.
During this operation, HEATING or FAN operation shall
1
operate.
During one touch clean, operation lamp is blinking.
"
", "
■ To cancel CLEAN operation
Press
(START/STOP) button. Or
●
Press
(CLEAN) button again.
●
(CLEAN) button, operation is limited to FAN
– 40 –
(CLEAN) button when unit is OFF.
" is displayed on the LCD.
Advertisement
