Advertisement
Operating Manual for the
KAT Master Hitch
Failure to comply with information contained in the Weldco-Beales Parts
and Service Manual may result in injury, death, damage to property, and/or
damage to the KAT Master Hitch. Ensure that all personnel have read and
understand the Parts and Installation manual before operating or maintaining
this equipment.
Engage/disengage attachments away from all personnel.
A visual inspection must be performed to ensure a proper connection each
and every time an attachment is engaged. Failure to properly engage an
attachment can result in injury or death. The attachment may drop without
warning if the KAT Master Hitch is not properly engaged with the attachment
Safety Notes:
1. Before operating the KAT Master Hitch read the Safe Working Procedures, and General
Operating and Maintenance Guidelines.
2. Always utilize the Parts and Installation manual to ensure the recommended procedures have
been used to ensure a successful and correct installation.
3. Always ensure when coupling or uncoupling the attachment that the machine is at low engine
idle.
4. Never operate or move the machine with the lock pins disengaged from the attachment and
the KAT Master Hitch still inserted in the attachment.
5. Always ensure that all surrounding personnel and/or objects are at the recommended O.E.M
(Original Equipment Manufacturer) safe working distance from the operating area of machine.
6. Always ensure that the attachment will be uncoupled in a safe, stable position to prevent
unexpected or sudden movement that could cause damage, injury or death.
7. Always conduct a workplace hazard assessment prior to work commencing to address any
dangers or potential dangers arising out of the use of the equipment and/or KAT Master Hitch
and attachments.
8. If the KAT Master Hitch is observed to be not properly engaged in the attachment the
operator should immediately discontinue use. The KAT Master Hitch and attachment should
be immediately secured and not placed into operation until there has been a full assessment of
any malfunction and all problems are remedied by qualified personnel.
9. Do not use any attachment which is not in the correct tonnage class.
901-213-0001
WARNING
!
9
PN # 599-002-195
October 2014
Advertisement
