Advertisement
3) When the top bar of the KAT Master Hitch is fully inserted in the top hooks of the attachment
slowly tilt the Master Hitch back to rotate the bottom of the Master Hitch into the lower portion
of the attachment lugs.
4) After the KAT Master Hitch is fully seated, extend the lock pins, engaging the attachment.
ISO 23727 compliant KAT master hitches are designed to work with a variety of
manufacturers lugging. The location of the attachment lug stops may not be compatible with
the KAT master hitch.
Carefully check the location of the attachment lug stops. Remove and relocate as required.
5) Manipulate the tilt circuit hydraulics to perform a visual inspection from the operators cab to
ensure that the attachment is seated properly on the KAT Master Hitch and that both lock pins
are fully engaged.
901-213-0001
NOTICE
ISO 23727 Compliant Kat Master Hitches
12
October 2014
Advertisement
