WBM KAT Master Hitch Installation And Parts Manual page 10

Uncoupling the Attachment
1) Position the attachment on level ground, ensuring that the attachment will remain stable after
uncoupling.
Engage or disengage attachments away from all personnel as the attachment may drop without
warning. Failure to do so may result in injury, death or damage to property or the KAT Master
Hitch.
Use only WBM style lugged wheel loader attachments on the WBM style KAT Master Hitch.
Failure to do so may result in injury, death or damage to property or the Master Hitch.
2) With the attachment positioned on level ground, hydraulically disengage the lock pins from the
attachment. If required, slowly manipulate the KAT Master Hitch by operating the tilt circuit to
allow easier disengagement of the lock pins.
3) After the lock pins have been fully disengaged, slowly tilt the KAT Master Hitch forward. Slowly
back the machine away to disengage the bottom of the attachment.
4) After the bottom end of the KAT Master Hitch is disengaged, lower the machines lift arm/boom
to free the top end of the hitch.
901-213-0001
! WARNING
WARNING
!
10
October 2014