Copy And Paste - Kurzweil K2600 Setup Manual

Setup Mode and the Setup Editor
The Utility Soft Buttons
As with programs, setups can be saved to and deleted from RAM only. The names of all setups
in RAM have an asterisk (*) next to them. If you try delete a setup from ROM, the K2600 will
ignore the delete command, and the setup will remain in memory.
Dump
This sends a MIDI System Exclusive dump of the current setupÕs settings. There is also a
function for dumping all setups. To dump all setups, go to Master mode. Select the OBJECT
page, and press the Dump soft button to select which objects to dump via SysEx.
For more on Object Utilities, see Chapter 11. For more about System Exclusive messages, see the
MusicianÕs Reference.
New Zone (NewZn)
Press NewZn to create a new zone with default parameters. The K2600 imports this zone from
Zone 1 of 99 Default Setup. If there are parameters or entire pages you use often, you can create
your own Default Setup and save it to location 99; pressing NewZn will then import zones from
your custom Default Setup.
Duplicate Zone (DupZn)
This adds a new zone with the same parameters as the current zone.
Import Zone (ImpZn)
You can import, or Òbring in,Ó any zone from any setup in memory. Press ImpZn, and use any
data entry method to choose a setup to import from. Then use the Chan/Bank buttons to select
one of that setupÕs zones. As you do this, you can audition each zone to hear how it will sound
in the current setup. Now press Import, and the zone you selected will be added to the current
setup.
Note: If you are using all eight zones in a setup and you try to add, duplicate, or import a zone,
a ÒNo More ZonesÓ message appears. You must delete an existing zone before you can add,
duplicate, or import any new ones.
Delete Zone (DelZn)
This deletes the current zone from the setup. Use DelZn to free up zones so you can add or
import new ones.

Copy and Paste

These functions are handy if youÕve spent some time tweaking a page or line of parameters, and
you want to copy them quickly to other zones. Start by highlighting a parameterÕs value and
pressing the Copy soft button. You can copy more than one value. Then use the Chan/Bank
buttons to select the zone to which you want to copy those values. Press the Paste soft button,
and all the values you copied replace the corresponding values in the current zone.
You can also paste the value into any zone of any other setup. Just copy a parameterÕs value,
press Exit to leave the current setup, and select a different setup. Then press Edit, select the same
page or physical controller type as in the last setup, and paste the new value. The values you
copy each remain in one of nine paste buffers, so you can keep pasting these values to different
zones in any setup. When you press Copy on a new page or line of parameters, you replace the
contents of the current paste buffer with the new values.
7-46